These kits provide secure low-visibility deer fences good for protecting yards and gardens. Use the added height for reassurance. A 7-footer is all you really need, but added height provides peace of mind. These kits come with everything required to build a strong and effective deer fence—including posts with drives sleeves (for ease of installation) and a 6-inch bottom fold (to prevent deer from nosing underneath). If you have rabbits or woodchucks, be sure to get a bottom barrier (see Accessories below) to keep them from gnawing holes in the fence that deer can then enlarge.
Every 100 feet of kit includes the following:
- One 8 x 100-foot roll of professional heavy duty polypropylene deer fencing
- Seven 1-5/8” round black steel posts with drive sleeves for a 7.5-foot fence
- Drive cap for installing sleeves
- Seven 1-5/8” black vinyl post caps
- At least 50 strong zip-lock fasteners
- At least 20 white warning banners
- At least 18 foot-long kinked galvanized ground stakes
NOTES: (1) Every fence kit comes with a drive cap for installing the drive sleeves. (2) The fencing’s 8-foot height permits 6 inches to be folded outward toward the deer and staked down with ground stakes, preventing deer from nosing under the fence—thereby blocking their favored route of entry.
Accessories (optional items to add from the drop-down menu above):
- Corner Braces: These protect corners against sideways stress. They consist of earth anchors with attachment wires to be arranged so that no cables hang outside the fence line. Add these to protect against snow loads, falling tree branches, and the weight of the fencing. Recommended for fences over 100 feet long, especially ones in snow-prone areas. Get 1 per corner, defining a corner as every place where a turn is 45 degrees or more.
- End Braces: These protect ends and gates against sideways stress. Like corner braces, they consist of earth anchors with attachment wires to be arranged so that no cables hang outside the fence line. They should be added to protect against snow loads, falling tree branches, and the weight of the fencing. Recommended for fences over 100 feet long, especially metal hexagrid fences and ones in places with lots of snow. Get 1 per corner and 2 per gate, defining an end as any place where the fence terminates against a building, wall, or other fence.
- Quality Access Gate 3-7 Feet Wide: These gates admit people and small pieces of machinery (mowers, rototillers, etc.) rather than cars or trucks. They come as kits with easy (pictorial) assembly instructions and include their own support posts.
- Quality Driveway Gate 8-14 Feet Wide: These gates have a single door. Designed for admitting vehicles, they come as kits with easy pictorial assembly instructions and include their own support posts.
- Tension/Top Support Wire: Our black pvc-coated tie wire has a 13.5-gauge steel core. Unlike nylon monofilament line it requires no special terminators or tighteners—because it doesn’t stretch and can be terminated by simply twisting it around itself. We combine it here with strong black zip-tie fasteners, providing 1 fastener per foot of fence. Get this to improve the fence top’s appearance and protect against falling branches.
- Extra Posts: Identical to the posts in the main kit, these provide additional strengthening for fences likely to face repeated snow loads. Together with the posts in the kit and a single gate, they lower the average distance between fence posts to 10 feet.
7.5 x 100, 200, 300, 400, or 500 feet
20 ga. galvanized steel wire woven into a 1-inch mesh and coated with black pvc. Breaking strength 650+ pounds per linear foot.
There are no reviews yet.